This residential Jackshaft opener will provide a versatile
solution to many unique installation problems. This wall mount
design is perfect for doors with very low ceilings, cathedral
ceilings, or obstructed ceilings, or if you want to maximize
your ceiling storage space. The Jackshaft opener will accomplish
many of today's needs. For sectional doors with TORSION SPRINGS
ONLY up to 14' high. Can NOT be used with sectional overhead
doors that have extension type springs.
Features Include
Remote Light - This light can be mounted anywhere on the
ceiling in the garage.
Power Lock - A deadbolt lock is activated by the opener each
time the door is opened or closed.
Cable Tension Monitor - Uniquely designed to monitor cable
tension and help eliminate cable slips off the drum.
Adaptive Force Setting - Senses changes to the door and will
automatically adjust the force to temperature fluctuations,
floor height & door track movement.
Patented Absolute Positioning Technology - This new design
will allow electronic limits to be extremely accurate even after
a power outage or where power is removed for an extended period
of time, such as in new construction.
Powerful 24v DC Motor - Provides ultra-quiet slow start/slow
stop for smooth operation.
Accessories Included
1 - Motion detecting control panel
1 - Remote light
1 - 3-button Burled Walnut Security+® remote
control
Security and Safety Features
Power Lock - Similar to a deadbolt, it ensures a door cannot
be forced open once it goes down.
Manual Release Handle - in case of power failure to release door
for manual operation.
The Protector System - projects an invisible light beam across
the garage opening. If beam is broken while door is closing, the
opener will reverse. Door will not close if beam is obstructed.
HomeLink® Compatible - the in-vehicle universal remote control.
Standard Specifications
Garage Door Opener Dimensions: 6.85"D x 16.25'H x
6.01"W
Maximum Door Size: Up to 14' High, Total of 180
square feet
Maximum Door Weight: 650 lbs.
Travel Rate: Approximately 7.6" /Second
Headroom Clearance Required: 3" from Center of Torsion Bar
