Overhead Door of the L.A. Basin


 Commercial Sectional Door Operators
  The industry’s most comprehensive line of commercial operators. Our operators will fit most any application.  
 
Model   Max. Height   Max. LBS.   Mounting Configurations
NEW! Model RDX M   33'   500 lbs.   Side Mount
Model RMX   14'   620 lbs.   Trolly or Side Mount
Model SEL+   18'   850 lbs.   Trolly or Side Mount
NEW! Model RDX S   40'   900 lbs.   Side Mount
NEW! Model RMX S-H   40'   900 lbs.   Side Mount
Model JST+   21'   1400 lbs.   Trolly, Side Mounted
Model L   25'   1500 lbs.   Trolly, Side Mounted
Model SDB   25'   2800 lbs.   Side Mounted, Center
             
 


 RDX Models
  New! Introducing the RDX™ Commercial Operator Series - a line of medium and standard duty commercial DC motor operators. The RDX™ series is available in three models: Medium (M), Standard (S) and Standard with Hoist (S-H). RDX™ is perfect for applications with limited space, quiet operation and quick installation.  

This operator’s built-in features eliminate the need to install additional accessories, saving considerable time on the installation process. RDX™ offers an automatic limit switch, which eliminates the need for installers to have to set open and close limits. This commercial operator also features QIK-FIT™ install, and a low-voltage DC motor for quiet operation.

The pre-assembled, self-contained units save considerable installation time and includes a variety of standard features which provides safety and convenience. RDX™ operators can be installed by one person and offer secure and reliable operation for commercial sectional doors.
 
RDX™ Commercial Operator standard product features include:
  • Automatic limit setting
  • Installation requires no additional equipment, saving considerable installation time
  • Lightweight and quiet operation
  • Soft start and stop reduces noise and wear and tear and eliminates cable jumping
  • Built in timer to close; useful for special applications like unmanned fire stations
  • Safety reversing feature, auto reversing upon obstruction without use of optional sensing edges
  • Compact design requires significantly less side room vs. typical commercial operators
  • Slows down upon third attempt to close after detecting an obstacle
  • Service reminders set up at every 2,500 cycles from controller
  • Cycle counter
  • Automatically locks and unlocks door upon operation with an optional accessory (solenoid lock)

RDX™ M

  • Medium Duty
  • Up to 170 sq. ft.
  • Maximum door weight 500 lbs.
  • 650 Newton motor
  • ONLY 9 lbs motor head weight

RDX™ S

  • Standard Duty
  • Up to 350 sq. ft.
  • Maximum door weight 900 lbs.
  • 1300 Newton motor
  • ONLY 12.5 lbs motor head weight

RDX™ S-H

  • Standard Duty with Hoist
  • Up to 350 sq. ft.
  • Maximum door weight 900 lbs.
  • 1300 Newton motor
  • ONLY 24 lbs motor head weight


 Model RMX
  Introducing the RMX® Operator - our newest and most advanced medium-duty operator yet. Designed for quicker installation and hassle-free operation, the RMX® offers convenient features and technical innovations found nowhere else in a medium-duty operator.

In addition to its quality craftsmanship, industry-leading warranty and rugged design, the RMX® Operator makes set-up a snap, thanks to direct coupling and the availability of easy access mounting holes.

Standard features include Socket-lock Protection, Auto-reverse and an Auto-tensioning Belt System. 

  

  A Great Solution Just Keeps Getting Better
The Intelligent Menu Structure used in all RMX® Commercial Operators makes daily operations upgrades simpler than ever. For every option board installed, the intuitive system automatically brings up an operations menu, so there’s no confusion, no guesswork and no delays in operator set-up. Plus, all RMX® systems are designed to meet the rigid requirements of UL325.
 

Standard Features
  • Motor Single-phase voltages of 115 Volts AC and 230 Volts AC 1/2 horsepower
  • Direct Coupling Provides fast, easy installation with fewer parts and better structural support
  • Display 16-character LCD display provides easy-to-read set-up and diagnostics with backlight for low-light conditions
  • Cycle Counter Displays the total cycles logged over the operator’s lifetime, to support warranty and service functions
  • Adjustable Shaft Output shaft can be moved from one side to the other providing flexible installation options
  • Independent Timers Automatic maximum run timer stops the close function if preset run time is exceeded, allowing for inspection
  • Control System On-board Open, Close and Stop buttons make set-up and testing simple, saving time during installation
  • Control Buttons
       - Cal Mode/Run Mode
       - Backlight
       - Scroll Up/Down
       - Set/Clear
A world of practical uses for business
The RMX® family of medium-duty commercial operators gives you exceptional flexibility to select the system that best suits your industrial application.

RMX® Trolley
For use on standard lift doors up to 14 feet high and 620 lbs

  • 120 square feet of 16 gauge steel insulated sectional
  • 290 square feet of 24 gauge steel non-insulated sectional

RMX® Jackshaft with and without Hoist – Sectional Door
For use on vertical lift, lift clearance sectional door up to 16 feet high and 620 lbs

  • 120 square feet of 16 gauge steel insulated sectional
  • 290 square feet of 24 gauge steel non-insulated sectional

RMX® Jackshaft with and without Hoist – Rolling Service Doors and Grilles
For use with rolling steel doors or grilles up to 16 feet high and 580 lbs

  • 203 square feet of 22 gauge rolling steel


 Model SEL+
  Model SEL+ is designed to operate doors up to 18' (5486mm) in height and 850 pounds (386kg). It is available as a trolley-type or side-mounted unit.  

UL Listed Standard Voltages
  • 1/3HP, 115VAC single phase
  • 1/2HP, 115/230VAC single phase and 208-230/460VAC three phase

Non UL Listed Voltages available

  • 1/2HP, 208VAC single phase
  • 1/2HP, 380, 415, 575VAC three phase
  • 50HZ applications
 

Standard Features
  • Rotary limit switches with vernier adjustment - synchronized with the door.
  • Adjustable disc clutch.
  • Ball bearing power train.
  • Drum type solenoid actuated brake. (Optional on Drawbar units)
  • Quick disconnect door arm for emergency operation. (Drawbar Units)
  • Primary reduction V-belt and pulley, secondary chain and sprocket. Average door speed of 11.5 inches per second. (Drawbar Units)
  • Track boom for doors up to 12' high. (Drawbar Units)
  • All chain carriage drive. (Drawbar Units)
  • Wood runners on trolley. (Drawbar Units)
  • Versatile direct coupling to hollow or solid door shaft coupling kit. (Jackshaft Units)
  • Mounting brackets adjustable for either 3 3/4" or 5" shaft center line distance. (Jackshaft Units)
  • Floor-level disconnect for emergency door operation (Release Model). (Jackshaft Units)

Standard Electrical Features
  • Instant reversing continuous duty motor with automatic thermal overload reset.
  • Heavy duty reversing contactor - electrically and mechanically interlocked.
  • 24-volt AC three button control standard. (115VAC control voltage option available)
  • Prewired to accept:
       - Momentary or Constant contact models
       - External sensing device such as sensing edges or photocells.
       - Single or three-button control stations or a combination of both.
       - 3 wire radio receiver.

Options
  • Timer package automatically closes door. Programmable for flexible door operation. (optional light package for door status)
  • Totally Enclosed Non Ventilated Motor. (TENV)
  • Car Wash Modification
  • NEMA 4, 4X and 12 Modifications
  • Double Drive Pulley
  • Auxiliary Limit Switch


 Model JST+
  Model JST+ is designed to operate doors up to 21' (6401mm) in height and 1400 pounds (635kg). It is available as a trolley-type, side-mounted, or center-mounted unit.  

UL Listed Standard Voltages
  • 1/3 HP 115VAC single phase
  • 1/2HP & 3/4HP, 115/230VAC, single phase and 208-230/460VAC three-phase

Non UL Listed Voltages Available

  • 3/4HP, 208VAC single phase
  • 1/2HP, 575VAC three phase
  • 1/2HP and 3/4HP, 380 or 415VAC three phase
  • 50HZ applications

Standard Features
  • Rotary limit switches with vernier adjustment - synchronized with the door.
  • Adjustable disc clutch.
  • Ball bearing power train.
  • Drum type solenoid actuated brake. (Optional on Drawbar units)
  • Quick disconnect door arm for emergency operation. (Drawbar Units)
  • Primary reduction 6 rib poly J-belt and pulley, secondary chain and sprocket.
  • Average door speed of 11 inches per second. (Drawbar Units)
  • Angle reinforced double track boom for doors over 10' high. (Drawbar Units)
  • All chain carriage drive. (Drawbar Units)
  • Wood runners on trolley. (Drawbar Units)
  • Versatile direct coupling to hollow or solid door shaft coupling kit. (Jackshaft Units)
  • Mounting brackets for either 3 3/4" , 5" or 6" shaft centerline distance. (Jackshaft Units)
  • Chain hoist for emergency door operation. (Jackshaft Units)

Standard Electrical Features
  • Instant reversing continuous duty motor with automatic thermal overload reset.
  • Heavy duty reversing contactor - electrically and mechanically interlocked.
  • 24-volt AC three button control standard. (115VAC control voltage option available)
  • Prewired to accept:
       - Momentary or Constant contact models
       - External sensing device such as sensing edges or photocells.
       - Single or three-button control stations or a combination of both.
       - 3 wire radio receiver.

Options
  • Timer Package. Automatically closes door. Programmable for flexible door operation. (optional light package for door status)
  • Totally Enclosed Non Ventilated Motor. (TENV)
  • Car Wash Modification
  • NEMA 4, 4X and 12 Modifications
  • Auxiliary Limit Switch


 Model L
  Model L+ is a heavy-duty commercial operator designed to operate doors up to 25' (7620mm) in height and 1500 pounds (680kg). It is available as a trolley-type (20:1 gear ratio), or side-mounted or center-mounted unit (40:1 gear ratios).  

UL Listed Standard Voltages

  • 1/3HP, 1/2HP, 3/4HP, 115/230VAC, single phase and 208/230/460V three phase

Non UL Listed Voltages Available

  • 1/3HP, 1/2HP and 3/4HP 208VAC single phase

  • 1/2HP, 575VAC three phase

  • 1/2HP and 3/4HP, 380 or 415VAC three phase

  • 50HZ applications

Standard Features
  • Rotary limit switches with vernier adjustment - synchronized with the door.
  • Adjustable disc clutch.
  • Ball bearing power train.
  • Drum type solenoid actuated brake. (Optional on Drawbar units)
  • Primary reduction worm gear in oil bath, secondary chain and sprocket.
  • Average door speed of 11.5 inches per second. (Drawbar Units)
  • Back to back reinforced double track boom for doors over 12' high. (Drawbar Units)
  • All chain carriage drive. (Drawbar Units)
  • Wood runners on trolley. (Drawbar Units) Versatile direct coupling to hollow or solid door shaft coupling kit. (Jackshaft Units)
  • Mounting brackets for either 3 3/4" , 5" or 6" shaft centerline distance. (Jackshaft Units)
  • Chain hoist for emergency door operation. (Jackshaft Units)

Standard Electrical Features
  • Instant reversing 30-minute duty cycle TENV motor with automatic thermal overload reset.
  • Heavy duty reversing contactor - electrically and mechanically interlocked.
  • 24-volt AC three button control standard. (115VAC control voltage option available)
  • Prewired to accept:
       - Momentary or Constant contact models
       - External sensing device such as sensing edges or photocells.
       - 3 wire radio receiver.

Options
  • Timer Package.  Automatically closes door. Programmable for flexible door operation. (optional light package for door status)
  • NEMA 4, 4X and 12 Modifications
  • Auxiliary limit switch
  • Explosion Proof Modification (not available in 1/3HP units)
  • Quick disconnect door arm for emergency operation. (Drawbar Units)


 Model SDB
  Model SDB+ is an extra-heavy-duty commercial operator designed to operate doors up to 25' (7620mm) in height and 2800 pounds (1270kg). It is available as either a side-mounted or center-mounted unit.  

UL Listed Standard Voltages

  • 1HP 115/230VAC single phase and 208-230/460VAC three phase

  • 2HP 208-230/460VAC three phase

Non UL Listed Voltages Available

  • 1HP 208VAC single phase

  • 1HP and 2HP, 380 or 415, 575 VAC three phase

  • 50HZ applications

Standard Features
  • Rotary limit switches with vernier adjustment - synchronized with the door.
  • Adjustable torque limiter clutch.
  • Ball bearing power train.
  • Drum type solenoid actuated brake.
  • Primary reduction worm gear in oil bath, secondary chain and sprocket.
  • Versatile direct coupling to door shaft or with chain and sprocket.
  • Chain hoist for emergency door operations.

Standard Electrical Features
  • Instant reversing continous duty motor with automatic thermal overload reset.
  • Heavy duty reversing contactor - electrically and mechanically interlocked.
  • 24-volt AC three button control standard. (115VAC control voltage option available)
  • Prewired to accept:
       - Constant or Momentary contact open and/or closed.
       - External sensing device such as sensing edges or photocells.
       - Single or three-button control stations or a combination of both.
       - 3 wire radio receiver.

Options
  • Timer Package-Automatically closes door. Programmable for flexible door operation.
    (optional light package for door status)
  • NEMA 4, 4X and 12 Modifications
  • Auxiliary Limit Switch
  • Explosion Proof Modification
  • Totally Enclosed Non-Ventilated Motor(TENV)
 

 

Home - Company Profile - Contact Us - What's New - See Our Specials - EcoBuilt - Banner Collection
Thermacore - Courtyard - Ribbon V12 - Ranch House - Traditional Steel -  Wood - Sectional Steel - Rolling Steel
Jet Roll High Performance - Fire Doors - Security Grilles - Residential Stealth - Residential Screw
Residential Chain Lift 1020 - Residential Liftmaster 3800 Jackshaft - Commercial Rolling Door Operators
Commercial Sectional Operators - Commercial Counter Operators - Homeowners Associations
Apartment Complexes - Photo Gallery
   
  Home  
Company Profile
 
Residential Doors
Commercial Doors
Garage Door Openers
Property Managers
Gallery
Contact Us