|
Commercial Counter Door Operators
|
|
|
|
|
Rolling Doors are available for a wide range of applications and
situations. |
|
 |
| |
|
Model |
|
Type |
|
Mounting Configurations |
| Model CDO |
|
Gear-Reduced |
|
Front of Hood |
|
Model RMX |
|
Belt Driven |
|
Wall Mounted |
| |
|
|
|
|
|
| |
|
Model CDO
|
|
|
|
|
Model CDO is a gear-reduced commercial operator with a 1/2 HP
motor. The CDO operator may be used for doors up to 140 sq. ft.
(13006 sq. mm). Mounting is front-of-hood only. |
|
|
UL Listed Standard Voltages
- 1/2HP 115VAC single phase
|
 |
|
Standard Features |
 |
|
|
- Momentary or Constant contact models
- Driven limit switches synchronized with the door.
- Primary reduction helical gear, secondary hardened bevel
gear.
- Governor, centrifugal drum type. (Fire Door Model)
- Release - spring loaded for automatic release by
optional fuse link, Fire Sentinel™ or other fire detection
system. (Fire Door Model)
|
|
|
|
Standard Electrical Features |
|
|
|
|
- Instant reversing continous duty motor with automatic
thermal overload reset.
- Dual relay control board.
- 24-volt (D.C.) control standard.
- Rated at 5 cycles per hour
- Momentary contact models have open, closed, stop
pushbutton.
- Constant contact models have open and close pushbutton.
- Prewired to accept external sensing devices such as
sensing edges or photocells. (Momentary contact models only)
|
|
|
|
Options |
|
|
|
|
- Crank Operation. (Model CDO only)
- Fire Sentinel™. (Model CDO Fire Door only)
|
|
Model RMX
|
|
|
|
|
Introducing the RMX® Operator - our newest and most
advanced medium-duty operator yet. Designed for quicker
installation and hassle-free operation, the RMX® offers
convenient features and technical innovations found nowhere else
in a medium-duty operator. In addition to its quality
craftsmanship, industry-leading warranty and rugged design, the
RMX® Operator makes set-up a snap, thanks to direct coupling and
the availability of easy access mounting holes.
Standard features include Socket-lock Protection, Auto-reverse
and an Auto-tensioning Belt System. |
|
 |
| |
A Great Solution Just Keeps Getting Better
The Intelligent Menu Structure used in all RMX® Commercial
Operators makes daily operations upgrades simpler than ever. For
every option board installed, the intuitive system automatically
brings up an operations menu, so there’s no confusion, no
guesswork and no delays in operator set-up. Plus, all RMX®
systems are designed to meet the rigid requirements of UL325. |
|
|
|
|
|
Standard Features |
|
|
|
|
- Motor Single-phase voltages of 115 Volts AC and 230
Volts AC 1/2 horsepower
- Direct Coupling Provides fast, easy installation with
fewer parts and better structural support
- Display 16-character LCD display provides easy-to-read
set-up and diagnostics with backlight for low-light
conditions
- Cycle Counter Displays the total cycles logged over the
operator’s lifetime, to support warranty and service
functions
- Adjustable Shaft Output shaft can be moved from one side
to the other providing flexible installation options
- Independent Timers Automatic maximum run timer stops the
close function if preset run time is exceeded, allowing for
inspection
- Control System On-board Open, Close and Stop buttons
make set-up and testing simple, saving time during
installation
- Control Buttons
- Cal Mode/Run Mode
- Backlight
- Scroll Up/Down
- Set/Clear
|
A world of practical uses for business
The RMX® family of medium-duty commercial operators gives you
exceptional flexibility to select the system that best suits
your industrial application.RMX® Trolley
For use on standard lift doors up to 14 feet high and 620 lbs
- 120 square feet of 16 gauge steel insulated sectional
- 290 square feet of 24 gauge steel non-insulated sectional
RMX® Jackshaft with and without Hoist – Sectional Door
For use on vertical lift, lift clearance sectional door up to 16
feet high and 620 lbs
- 120 square feet of 16 gauge steel insulated sectional
- 290 square feet of 24 gauge steel non-insulated sectional
RMX® Jackshaft with and without Hoist – Rolling Service Doors
and Grilles
For use with rolling steel doors or grilles up to 16 feet high
and 580 lbs
- 203 square feet of 22 gauge rolling steel
|
|
|
|
|
|
Home
- Company Profile -
Contact Us -
What's New -
See Our Specials -
EcoBuilt -
Banner Collection
Thermacore -
Courtyard -
Ribbon V12 -
Ranch House -
Traditional Steel
- Wood -
Sectional Steel -
Rolling Steel
Jet Roll High Performance -
Fire Doors -
Security Grilles -
Residential Stealth
- Residential Screw
Residential Chain Lift 1020
- Residential Liftmaster 3800 Jackshaft
- Commercial Rolling Door Operators
Commercial Sectional Operators
- Commercial
Counter Operators - Homeowners Associations
Apartment Complexes -
Photo Gallery |
|
|
